Create with Quality ~ Top Quality Exotic Filaments
Cart 0

Monarch 3D Warehouse Tech Info

This Page is where we share designs and helpful tips for using Exotic 3d Filaments.
Thingiverse Files We Like:
Low Profile Filament Clip by ZzTriplett - http://www.thingiverse.com/thing:947310
Tri Tube Guide by meistertek - http://www.thingiverse.com/thing:930774
Toaster SD Card Holder by ThunderMuffinn - http://www.thingiverse.com/thing:946454
SD Card Holder - Enlarged Slots - http://www.thingiverse.com/thing:1386044
Filament Stand by joohansson - http://www.thingiverse.com/thing:566727
FFCP Alignment Bracket by Makersome - http://www.thingiverse.com/thing:805717
Universal Spool Holder by jjpowelly - http://www.thingiverse.com/thing:1001312
Printer Test Prints: 
Test your 3D printer! by ctrlV  http://www.thingiverse.com/thing:704409                       
3D Printer Shoot Out Test Models by Make  http://www.thingiverse.com/thing:533472 
Torture Test by Make  http://www.thingiverse.com/thing:33902      
#3DBenchy by Creative Tools  http://www.thingiverse.com/thing:763622                         
 
Print Settings Used on Our Flashforge Creator Pro:

3DomFuel Ingeo PLA:
205 degrees C - Extruder Temperature 
60-90 mm/second - Extruder Speed
100-120 mm/second - Travel Speed
3 - Shells (personal Preference)
50 degrees C  Build Plate Temperature - Heated build Plate Not a Necessity
.27 mm layer height
NinjaTek NinjaFlex
235 degrees C - Extruder Temperature 
15 mm/second - Extruder Speed
80 mm/second - Travel Speed
20% Infill
3 - Shells (personal Preference)
.4 mm nozzle with direct nozzle cooling
35 degrees C  Build Plate Temperature - Ambient - Blue Painters Tape
.27 mm layer height
Proto Pasta Carbon Fiber:
225 degrees C - Extruder Temperature 
48-60 mm/second - Extruder Speed
80-100 mm/second - Travel Speed
2 - Shells (personal Preference)
45 degrees C  Build Plate Temperature - Heated build Plate Not a Necessity
.27 mm layer height
Proto Pasta Magnetic Iron
210 degrees C - Extruder Temperature
48-60 mm/second - Extruder Speed
80-100 mm/second - Travel Speed
2 - Shells (personal Preference)
45 degrees C  Build Plate Temperature - Heated build Plate Not a Necessity
.27 mm layer height
Taulman T-Glase PETT: 
240 degrees C - Extruder Temperature 
48 mm/second - Extruder Speed
80 mm/second - Travel Speed
3 - Shells (personal Preference)
45 degrees C  Build Plate Temperature w/coat of PVA Glue (Elmers Glue Stick)
.27 mm layer height
Measure Filament Diameter and Adjust Filament Diameter Setting in Slicer
Be Sure to Remove Glue Residue before switching back to PLA